Actisense

Actisense NMEA 2000 Engine Monitoring Unit - Analog to NMEA2000 Engine Gateway

SKU 51787

$682.95

In stock

Secure checkout through our Wix store.

Delivery options, tax and final availability are confirmed at checkout.

Need help matching a part? Read our buying guide →

Product details

NMEA 2000 Engine Monitoring Unit - Analog to NMEA2000 Engine Gateway

Share engine information on the NMEA 2000 bus.

The Actisense EMU-1 is a specialized analogue to NMEA 2000 Gateway which converts data from analogue engine gauges/senders into NMEA 2000 data. The EMU-1 enables the sharing of engine data throughout the NMEA 2000 bus. It digitizes analogue engine sensors, enabling NMEA 2000 display devices to monitor the connected engine(s) on a vessel.

The EMU-1 can monitor vital engine parameters such as temperature, pressure RPM and fluid levels from up to two engines.

The EMU-1 has a PC-based configuration tool that allows the settings inside the EMU-1 to be changed to best suit the engine it is working with, making it a flexible solution for many engine makes and models.

An Actisense PC to NMEA 2000 Gateway (NGX-1/NGT-1) is required to configure the EMU-1.

The NGX-1 or NGT-1 must be used to update the firmware, connect the Toolkit and display data on a PC for diagnostic and information purposes, using NMEA Reader. Please visit the NGX-1 page and/or NGT-1 page for product details.

Features:

Enables analogue signals to be converted to NMEA 2000 messages

Convert signals from up to two engines (that share a common ground) with a single EMU-1

6 gauge / parameter inputs

4 alarm inputs

2 additional auxiliary inputs

2 Tacho inputs

Customized IP65 case

Diagnostic LED’s

Wide power compatibility of 9 to 35VDC

No need to change an existing engine

Easy installation

Easy to configure to suit the connected engine

Connect signals from fluid level gauges (that share a common ground with the engine) to NMEA 2000®

Optional DIN rail mounting kit available

Total engine hours are logged by the monitoring of engine Tach (RPM) input

Technical Specifications:

Power Supply

Supply Voltage - 9 to 35VDC

Supply Current - Typically Supply Protection - Continuous reverse polarity protection and load dump protection (meets SAE J1113)

Supply Connector - Pluggable 2-way screw terminal, 3.5mm pitch

Supply Voltage (NMEA 2000 Port) - 9 to 29VDC

Supply Current (NMEA 2000 Port) - Load Equivalent Number (LEN) - 1

Supply Protection (NMEA 2000 Port) - Continuous reverse polarity protection and overvoltage protection to 40V

NMEA 2000 Port – In/Out

Compatibility - Fully NMEA 2000 certified

Galvanic Isolation - 2500V input to ground, 1500V output to ground using ISO-Drive

Speed / Baud Rate - 250kbps

NMEA 2000 Connector - M12 male (A coded) connector

Gauge Inputs

Voltage Range - 0 to 35VDC

Input Impedance - > 50kΩ

Sender Feed - 0, 4 or 18mA

Accuracy - Input Connector - Pluggable 6-way screw terminal, 3.5mm pitch

Input Protection - Overvoltage protection to ±40V

Alarm Inputs

Voltage Range - 0 to 37VDC

Input Impedance - > 50kΩ

Threshold Voltage - Configurable, default is 5V

Alarm Polarity - Configurable, default is alarm on low input

Accuracy - Input Connector - Pluggable 4-way screw terminal, 3.5mm pitch

Input Protection - Overvoltage protection to ±40V

Tacho Inputs

Voltage Range - ±3 to ±60V

Input Impedance - > 100kΩ to ground

Input Pulse Range - 4 to 50,000Hz

Accuracy - Sender Compatibility - Ignition coil, alternator (“W”, “R” or “AC”) terminal, hall effect, VR or inductive sender

Threshold - Automatically adjusts to signal level

Input Connector - Pluggable 4-way screw terminal, 3.5mm pitch

Input Protection - Can withstand an ignition pulse to ±500V

Engine Log

Engine Hours - 2 separate engine hour logs internally connected to the tacho Inputs. Hours are logged when RPM is present, stored in non-volatile memory

Mechanical

Housing Material - Polycarbonate

Protective Lid Material - Polycarbonate

Sealing Materials - Expanded silicone foam gasket, closed cell polyurethane splash guard and ePTFE waterproof vent

Dimensions - 127mm (L) x 112mm (W) x 48mm (H)

Weight - 250g

Mounting - 4 x 3.5mm lugs to allow panel mount with self tapping s/s screws (included), optional DIN Rail mount available on request

Approvals and Certifications

EMC - EN 60945 (sections 9 & 10)

Environmental Protection - IP66 (PCB housing)

Operating Temperature - -20°C to +55°C

Storage Temperature - -30°C to +70°C

Recommended Humidity - 0 – 93% RH

Guarantee - 3 years

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Before you order

Match your equipment model, voltage, connections and mounting space. Product availability can change; review the final order details before payment.